Bottom shaft-product category
4Frequently Asked Questions
Your location: 博狗直营-
> FAQ- > Japanese miniature bearings
Matters needing attention in Japan?
注意事项: Note on Japanese miniature bearings : 1. Place the yoke on the end face of the host. 2. Insert the plug into the power socket with the control switch. 3. Check whether the grounding wire is good, and test with a stylus after power on. 4. Press the start button to power on the host. 5. Check that the yoke iron has no voltage to ground. 6. Press the stop button to power off the host and stop heating. 7, according to different specifications of miniature bearings or other workpieces, choose different yoke sleeves, put this yoke on the top surface of the host, should be flat. 8. When heating the miniature bearing, insert the sensor into the "sensing socket" and place the sensor close to the workpiece being heated.